How to Make Mitered Corners With Your Sewing Machine

Final product image
What You'll Be Creating
Create professional looking napkins, tea towels and more with this easy tutorial for sewing mitered corners!
Sewing with mitered corners supplies
  • Sewing machine
  • Fabric, cut to desired size (with seam allowances)
  • Coordinating thread
  • Scissors
  • Iron
  • Pins or fabric clips
  • Water-soluble marker (optional)
Pre-wash and dry your fabric.
Most fabrics will shrink a little the first time they are washed, so to avoid any issues I always wash and dry my fabrics before completing a project. Once the fabric is dry, iron out any wrinkles. You can cut your fabric to your desired size, or use pre-cut pieces. I like using fat quarters or fat eighths of fabrics, as they are easy to find at most quilting stores and are a great size for napkins, towels and place mats. Also, they come ready to go!
Iron your fabric
Fold over and iron your outer seams.
Before you begin to sew your fabric, you will fold and iron your edges. I generally fold over an edge about 1 cm wide and iron down the entire edge of one side of my fabric. This helps to create a guideline without having to mark or cut your fabric. This way if you decide you want a different width seam allowance, you can always just fold a different width and re-iron without damaging your fabric.
For this project, you will fold over your fabric edge by 1cm and iron the entire edge and then fold a second time (1 cm) and iron again. This will create a clean edge on the backside of your final project.
Fold over and iron the outer seams
Fold a second time and iron again
After the seams are ironed on all sides, unfold your first corner.
You will notice that a square has been created, with the outer seam bordering it on two sides. The corner of the square closest to the center of your tea towel will actually become the outer corner of your finished towel.
Unfold your first corner
Using a ruler or other straight edge, mark your corner to be trimmed.
You will be cutting off the entire corner of your piece of fabric, so use your straight edge to pass through opposite corners of your inner square. I use a water-soluble marker for this, as it washes out easily after you've finished sewing your towel.
Mark the corner to be trimmed
Cut the corner off your fabric on the line you marked.
You will notice I have marked the inner corner with a small blue dot; you can use this as a reference point.
Cut off the corner
Fold each corner together so the seams line up.
You should fold your fabric together so the "right side" of your fabric is touching. The corners will be turned out after being sewn.
Fold each corner together so the seams line up
Pin or use fabric clips to hold your fabric together straight.
I have drawn a reference line below showing the line you will be sewing in each corner of your napkin or tea towel. Each sewn corner will run from the fold out to your first ironed line, so if you are using 1 cm seams, you should stop sewing 1 cm from the open edge of your fabric. Use pins or fabric clips to hold your fabric together so it doesn't move while you sew each corner.
Pin or use fabric clips to hold your fabric together straight
Use pins or fabric clips
Sew your mitered corner stitch into each corner.
Depending on your preference, you can start at the fold and sew toward the edge of your fabric, or start 1 cm from the edge and sew toward the fold.
Sew your mitered corner stitch into each corner
Mitered corner stitch
Trim excess fabric from the corner to avoid too much bulk in your final tea towel or napkin.
Be careful not to get too close to your sewn corner, as you do not want it to pull out, but if it is too bulky your corners won't look as neat as they should.
Trim excess fabric from the corner
Turn out your corners.
You can use the end of a marker to help poke the corners out so that they have more of a point. Otherwise they may seem a bit rounded. The corners should all match up with your original ironed seam lines.
Turn out the corners
Refold and iron all of your edges to create a neat final seam edge.
Your pre-ironed edges should easily tuck back under and create a nice clean edge on both the front and back of your towel.
Refold and iron all of your edges
Pin or clip around the entire edge of your towel.
I try to space my clips as evenly as possible around the edges.
Pin or clip around the entire edge of your towel
Sew around the entire edge of your tea towel or napkin.
Sewing around the edges will create a "top stitch" line on the front of your tea towel or napkin as well as on the back. Make sure to choose thread that coordinates with your fabric, as it will be seen when you are finished.
Sew around the entire edge of your tea towel or napkin
Finished mitered corner
Congratulate yourself on a job well done and iron out any extra wrinkles. You can create a whole set of coordinating towels and napkins to give as gifts or keep for yourself. These also make an excellent "canvas" for embroidery patterns.
Sewing mitered corners finished product image
Sewing mitered corners finished product image 2

How to Make a Gathered Skirt

by
Final product image
What You'll Be Creating
Add a classic staple to your wardrobe with this simple gathered skirt. In this tutorial, you’ll learn how to use a few measurements to create your own skirt, perfect for spring days.

Supplies

supplies-gathered-skirt
  • 3m medium-weight fabric (like cotton)
  • 1m to 1.5m 20mm elastic tape
  • Measuring tape
  • Fabric scissors
  • Pins
  • Thread
  • Sewing machine

1. Prepare Your Elastic Band

Step 1

Start by measuring your waist (or where you would like the skirt to sit). Write this number down. This will be your waist measure.
Add 1cm to your waist measure. This will be your elastic length. Cut the elastic tape so that it is as long as your elastic length.
step-1-cut-elastic

Step 2

Overlap the two ends of the elastic by 1cm. Make sure there are no kinks or turns in the elastic. Sew in place using a zigzag stitch.
step-2-sew-elastic

2. Prepare Your Waistband

Step 1

Add 10cm to your waist measure. This will be your waistband length.
Cut a rectangle that is your waistband length across and 5.5cm tall.
step-3-cut-waistband

Step 2

With the right sides together, fold the fabric in half lengthwise, so that the two short ends are touching.
Sew using a 1.5cm seam allowance. Press the seam open.
step-4-sew-wasitband

3. Assemble Your Waistband

Step 1

Place the elastic band around the fabric waistband. The fabric waistband should have the wrong side facing out.
step-5-elastic-over-waistband

Step 2

Position the elastic band so that it is 1.5cm from the bottom edge of the fabric waistband.
Fold the waistband so that it covers the elastic band. Match the raw edges of the fabric waistband and pin in place.
step-6-fold-waistband

Step 3

Sew the waistband closed using a 1.5cm allowance and a zigzag stitch.
step-7-sew-waistband

4. Prepare Your Skirt

Step 1

Decide how long you would like the skirt to be. Measure from your waist (or where you would like the skirt to sit) to the point where you would like the skirt to end. Add 3cm. This is your skirt height.
step-8-measure

Step 2

Cut a rectangle that is 2.5m long and as tall as your skirt height.
Fold in half lengthwise so the two shorter sides are touching. Right sides should be together. Sew using a 1.5cm seam allowance.
Press the seam open.
step-9-sew-skirt

4. Attach the Waistband to the Skirt

Step 1

Mark the four corners of your waistband. Do this by laying the waistband out flat and marking the centre back point, centre front point, and two side points as well.
Repeat for the top edge of the skirt.
step-10-mark-corners

Step 2

Place the waistband over the skirt, with right sides together. Match the raw edge of the waistband to the raw edge of the skirt.
step-11-waistband-over-skirt

Step 3

Match the four pins of the waistband to the four pins of the skirt. Pin in place.
Gather the excess fabric between these four pins. Pin the excess fabric in place.
step-12-match-pins

Step 4

Sew around the skirt using a zigzag stitch to attach the waistband to the skirt.
step-13-sew

5. Hem Your Skirt

Step 1

Turn the skirt so the wrong side is facing out. Fold the bottom of the skirt over by 1.5cm. Press.
step-14-fold-hem

Step 2

Fold the bottom of the skirt over by another 1.5cm. Press.
step-15-fold-hem
Advertisement

Step 3

Sew around the top of the fold using a straight stitch.
step-16-sew-hem

Wear Your New Skirt

And you’re finished. Well done!
This is such a simple skirt. You could make it up in lots of different colours in a relatively short time. It would look great in gingham for a picnic, or floral for a summer’s day.
finished-skirt
finished-gathered-skirt
Do you like making your own clothes? How did you find this tutorial? Let us know in the comments section below – we’d love to hear from you.

 

Copyright @ 2013 Krobknea.

Designed by Next Learn | My partner